Menu
0844 850 0860

Telephone: 0844 850 0860

1100 Range Wall Tie

Type 4 Light Duty Tie

The 1100 range wall tie has been designed for use on domestic houses up to 10 metres in height. It can be used in cavities up to 100mm. It meets and exceeds the requirements of a type 4 tie as stated in PD 6697. This tie meets the technical requirements of the NHBC and has BBA approval.

 

CE Type A & NHBC

Wire Tie

Technical Data

The ACS 1100 range wire tie is available in grades 304 and 316 austenitic stainless steel and available in lengths from 200mm to 275mm in increments of 25mm. According to BS EN 845-1 a Type 4  wire tie is suitable for buildings up to 10m in height and should be installed at a density of 2.5 ties/m2. ACS recommends that the wire ties are installed with a nominal embedment of 62.5mm, the wall ties can be installed either way round due to the multi-drip feature, which prevents moisture from travelling across the cavity.

Test Results

 Test

Tie Length (mm)

Maximum Declared

Value (N)

BSEN845-1 Required

Value(N)

Brick Couplet Test

According To BSEN845-1

 Compressive

 225

 557

450

 250

 638

 275

 514

 Tensile

 225

 1256

 650

 250

 1879

 275

1220

 

Testing was undertaken at CERAM Building Technology which proved that the 1100 Range wire tie has a measured dynamic stiffness of 4.65MN/m3 in a 100mm cavity and therefore is classed as a Type A tie in Part E of the building regulations.

 

Click  to download the PDF data sheet

Place an order

ACS Stainless Steel Fixings are one of the largest and well established manufacturers of Structural Building Components in Europe.

Your Details

Wall Tie Details