0844 850 0860

Telephone: 0844 850 0860

3100 Range Wall Tie

Frame Cramp with Vertical Twist

The ACS 3100 range frame cramps are designed for use in either conventional or thin bed joints and are available in a variety of lengths to suit most applications.

These ties are supplied with a 3-holed safety end for bonding into the mortar along with a vertical twist to prevent moisture from crossing the cavity and a vertical slot in the upstand to allow adjustment when fixing.

Related Products:

Transfix Gauge Tape                        Neoprene Pads

Insulation Retaining Clip               Hammerfix Anchor

Tech Screw                                         Debonding Sleeves


Frame Cramp

Technical Data

The performance of frame cramps is determined by the position of the fixing. At the lowest point of the slot the frame cramp will have a safe working load of approximately 1.0kN. As the fixing position alters the capacity of the tie will reduce. ACS recommend using oversize washers with the fixing when installing cramps with a vertical slot.

Place an order

ACS Stainless Steel Fixings are one of the largest and well established manufacturers of Structural Building Components in Europe.

Your Details

Wall Tie Details