0844 850 0860

Telephone: 0844 850 0860

3200 Range Wall Tie

Safe Ended Frame Cramp with Drip

The ACS 3200 range wall tie’s design is for use in either conventional or thin bed joints and are available in a variety of lengths to suit most applications.

ACS supply these ties with a 3-holed safety end for bonding into the mortar. This also comes along with a drip feature to prevent moisture from crossing the cavity and a vertical slot in the upstand to allow adjustment when fixing.

Related products

Transfix Gauge Tape                    Neoprene Pads

Insulation Retaining Clip            Hammerfix Anchor

Tech Screw                                     Debonding Sleeves

Image of CE BS EN 845-1

Image of 3200 Range Wall Tie

Need help with installation ?

Technical Data

The performance of frame cramps is determined by the position of the fixing. At the lowest point of the slot the frame cramp will have a safe working load of approximately 1.0kN. As the fixing position alters the capacity of the tie will reduce. ACS recommend using oversize washers with the fixing when installing cramps with a vertical slot.

Place an order

ACS Stainless Steel Fixings are one of the largest and well established manufacturers of Structural Building Components in Europe.

Your Details

Wall Tie Details