Frame Cramps

ACS frame cramps tie masonry panels back to concrete, steel and timber frames. The ACS 3000 Range is the UK’s first formed, fully debondable frame cramp, working as a cavity, movement or shear tie in one product. The ACS 3200 Range suits larger cavities from 195mm to 345mm, with a 3-holed safety end for conventional or thin bed joints.

3000 higher res.619
3000 to block
ACS 3000 Range Frame Cramps – Steel Column Installation
Embedment 4
Embedment

ACS 3000 Range

One frame cramp for cavity, movement and shear duties: the ACS 3000 Range ties masonry panels back to a range of structural substrates from a single product. It is the UK’s first formed, fully debondable frame cramp and is consistently specified across the UK.

The advanced punched and pressed profile of the 3000 Range delivers high load capacity from a reduced cross-sectional area of 24mm2, lowering thermal transfer across the cavity compared with other ties. It is classified as a Type B tie under Approved Document E, with a measured dynamic stiffness of 8.8MN/m3 tested at Lucideon, making it suitable for projects with acoustic separation requirements.

Key Specification Details

  • Multi-purpose frame cramp: cavity tie, movement tie with debonding sleeve, or shear tie
  • Cavities 0-187.5mm; eight lengths available from 75mm to 250mm in 25mm increments
  • Debondable configuration allows in-axis movement of up to +/-10mm
  • Type B tie to Approved Document E – dynamic stiffness 8.8MN/m3
  • Reduced cross-sectional area of 24mm2 for lower thermal transfer
  • Integrated drip and formed section prevents water crossing the cavity; minimum mortar joint thickness 10mm
  • Clear embedment markings at 62.5mm; design embedment 50-75mm
  • Standard installation at 900mm horizontal and 450mm vertical centres, staggered between courses; reduced to 225mm around openings and unbonded edges
  • Manufactured from Grade 304 (BS EN 1.4301) austenitic stainless steel
  • A1 non-combustible – classified without testing in accordance with document 96/603/EC
  • UKCA / CE+UKNI marked to BS EN 845-1; Lucideon tested
Download NBS/BIM

Access the NBS specification and BIM resources for this product to support your project planning, specification and design.

Blue ACS logo

Want to learn more about Frame Cramps?

Tell us your substrate and cavity width and we’ll confirm the 3000 Range length, debonding and spacing, including any acoustic requirements.

Get in touch

ACS 3200 Range Frame Cramp Tie

ACS 3200 Range

For wide cavities from 195mm to 345mm, the ACS 3200 Range extends frame-cramp restraint to spans where standard cramps run out of reach. It is designed to tie a masonry panel back to a range of structural substrates, with a 3-holed safety end for bonding into conventional or thin bed mortar joints.

The tie includes an integrated drip feature to prevent water crossing the cavity and a vertical slot in the upstand to allow adjustment during fixing. It is available in six lengths from 275mm to 400mm to suit the full cavity range.

Key Specification Details

  • Cavities 195-345mm; available in six lengths from 275mm to 400mm in 25mm increments
  • 3-holed safety end for bonding into mortar joints
  • Integrated drip feature prevents water crossing the cavity; minimum mortar joint thickness 10mm
  • Vertical slot in upstand allows adjustment when fixing
  • Standard installation at 900mm horizontal and 450mm vertical centres, staggered between courses; reduced to 225mm around openings
  • Design embedment 50-75mm
  • Manufactured from Grade 304 (BS EN 1.4301) or Grade 316 (BS EN 1.4401) austenitic stainless steel
  • A1 non-combustible – classified without testing in accordance with document 96/603/EC
  • UKCA / CE+UKNI marked to BS EN 845-1; Lucideon tested
  • CCPI certified
Download NBS

Access the NBS specification and BIM resources for this product to support your project planning, specification and design.

More Than a Manufacturer. A Compliance Partner.

Every ACS customer benefits from ACS Assured – our framework built on three pillars: Compliance Through Expertise, Assurance Through Transparency, and Performance & Innovation. From Gateway 2 documentation to full product traceability and sustainable manufacturing credentials, it’s built into everything we supply.

Award ribbon and check mark icon representing compliance
Compliance Through Expertise
Balance scales icon representing assurance
Assurance Through Transparency
Light bulb and gear icon representing innovation
Performance & Innovation
Presenter delivering an ACS CPD session to a seated audience, with the RIBA CPD assessed material mark

Restraint Ties and Fixings CPD

ACS runs a CPD-certified seminar on restraint ties and fixings, hosted by Strategic Specification Director Paul Ruding and available online or in person. It covers brick-to-block ties for high-rise buildings, light gauge steel frames, the ACS FrameFix channel system and stone tie options. Book your place on our Wall Tie CPD page or get in touch to arrange a session for your team.

Tested, Certified, Trusted

Our frame cramps are independently Lucideon tested, UKCA / CE+UKNI marked, and A1 non-combustible without need for further testing, in accordance with document 96/603/EC.
CCPI Logo ACS 3200 Range Frame Cramp Tie Renewal Aug 26
UKCA, CE and UKNI conformity marks
Lucideon logo
Request the CAD file

Need the CAD file for this product? Submit a request using our form and our team will be in touch.

Technical Data Sheet

The ACS Frame Cramp Technical data sheets covers Lucideon-verified loading in accordance with PD6697, UKCA / CE+UKNI marking and A1 non-combustibility across the 3000 Range and 3200 Range frame cramp systems, with full CCPI-certified specification information for the 3200 Range.

FAQs

What is a frame cramp?
A frame cramp ties a masonry panel back to a structural frame, restraining it against loads such as wind. ACS frame cramps suit concrete, steel and timber-frame substrates across a range of cavity widths.
The ACS 3000 Range is a fully debondable frame cramp for cavities up to 187.5mm, capable of acting as a cavity tie, movement tie or shear tie in a single product. The ACS 3200 Range is designed for larger cavities from 195mm to 345mm, with a 3-holed safety end for conventional or thin bed joints.
Yes. In its debondable configuration with a debonding sleeve, the 3000 Range allows in-axis movement of up to +/-10mm, letting a single product cover cavity, movement and shear duties on the same project.
The ACS 3000 Range is classified as a Type B tie under Approved Document E, with a measured dynamic stiffness of 8.8MN/m3 tested at Lucideon, making it suitable for projects with acoustic separation requirements.

Related Products

Need further information or technical support?
Our team can help.