Conventional Masonry Support

ACS Conventional Masonry Support is manufactured to meet your exact masonry support needs including intricate designs, large cavities and unconventional brickwork coursing.

Below is a selection of popular fixing configurations, however, our technical department will be able to discuss your requirements and provide solutions which meet your exact specification.

Conventional Masonry Support – Type 1  

Using a continuous angle with brackets welded to the vertical leg of the angle. The brackets are then fixed to the structural frame. The most economical system for wider cavities, as the angle is kept to a minimum depth. 

Conventional Masonry Support – Type 2  

A continuous angle fixed directly to the structural frame. The efficiency of this system decreases with wider cavities. 

We take clear product information seriously

That’s why all our Masonry Support products carry the Code for Construction Product Information (CCPI) mark. 

Product Type Image
ACS Type 1 - Cast in Channel Masonry Support Systems can be installed into concrete via cast in 31/21 AXIS channels.
Product Type Image
ACS Type 1 - Masonry Support Systems can bolt to concrete via an expansion or chemical fixing.
Product Type Image
ACS Type 1 - Masonry Support Systems can bolt to the face of rolled hollow sections via blind bolts.
Product Type Image
ACS Type 1 – Masonry Support Systems can bolt to welded plates/tees via hex head setscrews.
Product Type Image
ACS Type 1 - Masonry Support Systems can bolt with hex head setscrews back to cleats.
Product Type Image
ACS Type 1 - Inverted Masonry Support Systems can be fixed back to a variety of structures.
Product Type Image
ACS Type 2 - Masonry Support Systems can bolt to cast in channels via T head bolts.
Product Type Image
ACS Type 2 - Masonry Support Systems can be bolted to concrete via expansion or chemical fixings.
Product Type Image
ACS Type 2 - Masonry Support Systems bolt to welded plates / tee’s via hex head setscrews.